SPPS SnapdragonMR E-Frame Magno-triggers
Paralleled to our conventional Snapdragon triggers, these babies are just drop dead sexy. When SPPS released this wave style trigger a few years ago, there were very few in this particular style available for any type of marker. Now you will find this style trigger available for most all electronic markers. Kingman even adapted this style trigger for their recently released VS2 markers. Why you say? Plain and simple, they work. Pushing the bottom portion of the trigger forward makes the trigger more available for your slower, longer walking finger. This in turn, helps both your fingers to work much easier in rhythmic unison. You'll be ripping in semi-auto with little or no need for the aide of the elaborate electronic modes available in todays electronic boards. The SPPS SnapdragonMR Magno-triggers are fully adjustable and full easy to follow installation instructions are provided as well. After adding this trigger, your MilSim MR will totally rock like no other! The SPPS SnapdragonMR Magno-triggers were specifically designed to directly fit the MR2 and MR3 e-framed markers only.
Sundragon Paintball Products Dragonfly Striker
Been looking for a cupped and polished Spyder striker at a modest price and noticed they are nowhere to be found? Meet the Sundragon Paintball Products Dragonfly striker!!! This striker has been cut, carved, cupped and polished to a mirror finish. You will no longer need to sit for hours at a time hacking away at your stock case hardened striker with primative tools only to find you've deformed your tools and possibly the striker as well. We'll save you the time of polishing with sandpaper and metal polish for hours too. This beautiful Spyder striker is available at a price much less than you may have been used to by others offered on the market today. The Sundragon Paintball Products Dragonfly striker is a direct replacement for other Spyder clone marker strikers as well. Pick up your SPPS Dragonfly today!!!!
SPPS Spli-Switch Kit
Introducing the Spli-Switch kit. We have had requests by patrons for a solderless 50 gram switch. Well, we got to work on this request and have discovered a way to install these switches without having to solder them in your electro. It should take you all of 10-20 minutes to install these depending on your mechanical skills. The switches have presoldered wires attached to them in a simple kit form with everything you'll need including detailed instructions. These 50 gram switches are a direct replacement for Spyder and most Spyder clone markers. The new Spli-Switch kits are available now! Proof positive that, your wish is our command.......
SPPS Snapdragon E-Frame Magno-triggers
SPPS finally breaks Spyders through the magnetic trigger barrier!!
Tired of that old spring return wobbly cast aluminum or flat blade trigger? Step into something with a bit of flare and distinctive sexy style with the new Sundragon Products ESP. IPI & CAMD e-frame Magno-triggers. These Magno-triggers will not only complement the distinctive looks of your marker but enhance its function as well. These are the first magnetic response triggers offered for Spyder markers on the open market. We have tested these triggers extensively with different strength magnets and think we have found the perfect combination for the perfect magnetic response pull. They’re not so strong that they feel like a spring response yet not so light that they have no resilience at all. Both come in a kit form with full instructions, are very simple to install and require absolutely no modifications to the trigger frame at all. All you need to supply is a little epoxy glue and you’re ready to rip up the field with your Spyder. The Snapdragon will fit Spyder ESP, IPI and CAMD trigger frames only.
