Don't have a soldering gun or solder? Lacking a bit in those soldering skills or just plain don't feel like messing with it? SPPS now gives you a simple option.........you asked for it and we delivered. We've taken our 'good' 50 gram micro switches and pre-soldered wires to them. Now it's simplified to install that 50 gram switch that you always wanted but didn't want to pay someone else big bucks to install for you. All you need to do is simply remove the old 250 gram switch, cut the ends of the attached wires, strip a little of the plastic insulation from the old wire, twist and splice the wires together, heat the shrink tubing over the splice and voila!!!!! You're ready to rip!!! And with the low $10 price tag, what's stopping you now? The kit comes with everything you need including instructions. Click the link supplied below for installation instructions in our tech section. Tell your friends about these simple to install switches and order a few. These will fit Spyders, Draguns as well as other electro's that use the same type of micro switch.
