Sorry.....the Dragonfly strikers have been backordered. We will restock if possible

The Sundragon Paintball Products Dragonfly striker is the newest addition to the SPPS signature line of products. This beautiful striker is cut, carved, cupped and polished to a gleaming shine. Now there's no need to hack away at your stock striker with primitive tools. SPPS has CNC milled these strikers to a perfectly fine tuned configuration just for you. The SPPS Dragonfly striker is one of the most simple upgrades you can install to your Spyder marker. Just remove the stock striker, drop the Dragonfly in and your Spyder is ready to rip with increased performance. When compared to the stock Spyder striker, tests showed up to a 20fps increase in velocity and 30psi drop in pressure when adding the Dragonfly to an LP configured Spyder. Fine tuning is at your discretion.

The sides of the Dragonfly have been cut and carved which will allow less total surface drag of the striker and creates an airway to evenly distribute any internal turbulence in the lower tube of the marker body. The face of the Dragonfly has been recessed to catch the recocking pressure from the valve more proficiently. The Dragonfly striker is recommended for low pressure applications but will perform with high pressure markers as well. These cut and carved materials slightly lighten the striker, but not so much that you need to increase the operating pressure to recock without jackhammering. The case hardened surface of the Dragonfly has been polished to a perfect shimmering shine that reduces any drag coefficient that your marker may have experienced with the stock black oxidized striker. No need to labor away with sandpaper and metal polish any more, we've done it for you.

If you're seeking a cupped and polished striker for your Spyder marker that involves no more labor than removing the old stock oxidized striker and dropping in the new, look no further, the SPPS Dragonfly is exactly what you're looking for. The SPPS Dragonfly striker will fit other Spyder clones that use the same striker dimensions as Kingman markers as well.